Pre-hung Unit and DP Information
Product Specifications for Mahogany or Alder SDL Exterior Wood Doors
Doors built for the True Divided Lite Series millwork program are included in the raftsman / SDL section of our Mahogany and Knotty Alder Entry Doors catalog, and have the following specifications*: 1) Solid wood construction in the stiles and rails. Stiles of these SDL door series use a engineered construction method, which greatly reduces the possibility of warpage. 2) SDL door panels are fully floating (not glued) for superior strength and longevity. Panels are 3 layers thick for strength and to greatly reduce the possibility of splitting. 3) All stile and rail joints use full cove and bead construction (instead of butt-gluing), and incorporate multiple grooved dowel construction at each joint. The top rail and lock rails use 3 dowels per side, and the large bottom rail uses 4 dowels per side. 4) SDL doors are available pre-hung in matching mahogany or knotty alder components. This assures a beautiful match and consistent grain and stain pattern. 4 5 ⁄ 8 ˝ and 6 5 ⁄ 8 ˝ jamb widths are standard. 5) Glass panels in alder or meranti-mahogany SDL Doors are double glazed (IG). There are 5 available glass options for SDL doors and sidelites. All glass is tempered for safety. 6) The Arch Top Rail Double SDL knotty alder and mahogany doors include raised moldings around the glass opening and the raised panels. All others doors in this section DO NOT include raised mildings.
The chart below lists rough opening dimensions and “DP” design pressure ratings for all of our standard “inswing” entryway configura - tions. Most of these entryway configurations have been approved by state regulatory entities for use in windstorm areas. Note that the “rough opening size” listed below is a “tight” size, and is for reference only. Your installer may wish to add to these rough opening sizes. It is important to measure your pre-hung entryway unit upon arrival at the jobsite, and to construct the opening to fit the individual entry- way unit. “Inswing” and “outswing” units have the same rough opening size. The DP ratings shown below apply to “inswing” entryways which use our Estancia doors, our Portobello doors, and our TDL doors. For DP ratings on “Outswing” entryways, please refer to our web site. These ratings do NOT apply to our DoorCraft series mahogany entryways, or door slabs of any series. Our fiberglass doors are Impact Approved. Please refer to our web site at www.glasscraft.com for more informa- tion on these products. In the chart below, “N/A” means that the product is not available OR the product configuration has not been tested for a DP Rating. For the most up-to-date information and test results for “outswing” entryways, please check your state regulatory website and/or our website: www.glasscraft.com . Inswing Entry Units with 6’8” Tall Doors Inswing Entry Units with 8’0” Tall Doors 32” x 6-8 door 36” x 6-8 door 32” x 8-0 door 36” x 8-0 door 42” x 8-0 door DP Rating Rough Opening Size DP Rating Rough Opening Size DP Rating Rough Opening Size DP Rating Rough Opening Size DP Rating Rough Opening Size
Available Stock Product Sizes varies depending upon the door profile. Refer to catalog for exact available sizes.
+47.2/-51.4 +47.1/-61.6 (TDL only)
+47.2/-51.4 +47.1/-61.6 (TDL only)
34.25” x 82.5”
38.25” x 82.5” +47.2/-51.4 34.25” x 98.5” +47.2/-51.4 38.25” x 98.5” +47.2/-51.4 44.25” x 98.5”
single door
Stile Construction Doors mahogany or knotty alder veneer or laminate over solid wood staves. Laminiate veneers may be 2 layers thick. Sidelites: solid wood (no raised molding)
arch top single door
N/A 34.25” x 82.5”
N/A 38.25” x 82.5”
N/A 34.25” x 98.5”
N/A 38.25” x 98.5”
N/A 44.25” x 98.5”
Stile Width All doors
round top single door
N/A
N/A
N/A 34.5” x 99.25”
N/A 38.5” x 99.25”
N/A 44.5” x 99.25”
6 1 ⁄ 1 1 ⁄ 2 1 ⁄
4 ˝ wide
2 ˝ wide 2 ˝ wide
1´ 0˝ wide sidelites 1´ 2˝ wide sidelites
door and 12” sidelite door and 14” sidelite
51.75” x 82.5” 53.75” x 82.5” 65.25” x 82.5” 69.25” x 82.5”
47.75” x 98.5” 49.75” x 98.5” 61.25” x 98.5” 65.25” x 98.5”
51.75” x 98.5” 53.75” x 98.5” 65.25” x 98.5” 69.25” x 98.5” 65.25” x 112”
57.75” x 98.5” 59.75” x 98.5” 71.25” x 98.5” 75.25” x 98.5”
47.75”x 82.5” +47.2/-51.4 +47.1/-61.6 (TDL only) 49.75”x 82.5” 61.25” x 82.5” +36.2/-45.7 +47.1/-61.6 (TDL only) 65.25” x 82.5”
+36.2/-45.7 +47.1/-61.6 (TDL only)
+36.2/-45.7
+36.2/-45.7
N/A
Stile & Rail Connection Method Doweled Cove and Bead Panel Thickness 7 ⁄
door and 2-12”sidelites +36.2/-45.7 +47.1/-61.6 (TDL only) door and 2-14”sidelites
+36.2/-45.7
+36.2/-45.7
N/A
16 ˝ laminated panel. Panel is 3 layers thick to eliminate splits through panel.
door, 2-12”sidelites, rectangular transom door, 2-14”sidelites, rectangular transom door, 2-12” sidelites, elliptical transom door, 2-14” sidelites, elliptical transom door, 2-12”sidelites, segment head transom door, 2-14”sidelites, segment head transom door, 2-12”sidelites, half round transom door, 2-14”sidelites, half round transom
N/A
65.25” x 96”
N/A
Wood Specie Meranti Mahogany or equivalent and Western Red Knotty Alder
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
N/A
65.25” x 98”
69.25” x 98”
65.25” x 114”
69.25” x 114”
65.25” x 101.25” 69.25” x 103.25” 65.25” x 103-3/8”
65.25” x 117.25” 69.25” x 119.25”
N/A
N/A
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
N/A
65.25” x 101.25”
65.25” x 117.25”
65.25” x 119- 3/8” 69.25” x 120.5” 65.25” x 131.5” 69.25” x 133.5”
N/A
N/A
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
N/A
SDL Door Panel Cross Section
SDL Door Glass Cross Section
+36.2/-45.7
65.25” x 103-3/8”
65.25” x 119- 3/8”
69.25” x 104.5”
N/A
65.25” x 115.5” 69.25” x 117.5”
N/A
Veneer Stile face
Veneer Stile face
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
+36.2/-45.7
N/A
65.25” x 115.5”
65.25” x 131.5”
SDL bar
+36.2/-45.7 +44.2/-55.7 (TDL only)
+36.2/-45.7 +44.2/-55.7 (TDL only)
66.75” x 82.5”
74.75” x 82.5” +36.2/-45.7 66.75” x 98.5” +36.2/-45.7 74.75” x 98.5”
N/A 86.75” x 98.5”
double door
SDL bar
arch top double door TDL arch top double
+50.0/-50.0 +45.0/-40.0 (TDL only)
+50.0/-50.0 +45.0/-40.0 (TDL only)
N/A
N/A
66.75” x 98.5”
74.75” x 98.5”
N/A
Insulated Glass Panel Assembly
3 ⁄ 4 ”
1 ⁄ 2 ˝
3 ⁄ 4 ˝
1 ⁄ 2 ˝
3 layer laminated Panel Assembly
6 1 ⁄ 4 ”
6 1 ⁄ 4 ”
round top double door
N/A
N/A
N/A
+50.0/-45.0 75.25” x 99.25”
N/A
double door,
el-
N/A
+36.2/-45.7 74.75” x 103.25”
N/A
+36.2/-45.7 74.75” x 119.25”
N/A
liptical transom
double door,
seg-
N/A
+36.2/-45.7 74.75” x 106.5”
N/A
+36.2/-45.7 74.75” x 122.5”
N/A
ment head transom
+36.2/-45.7 +44.2/-55.7 (TDL only)
74.75” x 120.25”
double door, half round transom
N/A
+36.2/-45.7 74.75” x 136.25”
N/A
N/A
* All specifications, product designs and information listed are subject to change without prior notice. We are constantly improving our products, and these improvements may cause us to change the specifications listed.
8
9
Powered by FlippingBook