Product Specifications: BarnCraft ® Optional Hardware
Sliding Door Privacy Lock Kits
These lock kits, available in 2 sizes, are designed to be mounted on the edge of the opening over which the sliding door slides, and are available in black or stainless steel.
1) The lock mounting plate screws onto the opening with 3 (included) screws; 2 round head screws on the top and bottom, and a flat head screw (not visible in photos) in the middle. 2) The moving lock plate mounts using the 2 round head screws and 2 washers (included). 3) The sliding door lock plate mounts on the edge of back face surface of the sliding door. Note that a 1/8" x 1-1/2" slot that is 1/4" deep must be cut into the door. This sliding door lock plate mounts over the slot. 4) The lock is set by rotating the moving lock plate into the slot on the sliding door lock plate. 5) Both sizes will work on all doors, but the Large lock looks and may function better with doors over 28 square feet. The regular lock measures about 1.75” x 2.25”. The large lock measures about 3” x 3.25”.
# BDPL1SS - Regular Stainless Steel finish
Note: GlassCraft will not prep doors for these locks, as the lock location varies for each specific installation.
2-3/8”
1-3/8”
1-3/8”
3”
lock mounting plate lock mounting plate
moving lock plate moving lock plate
rolling door lock plate
lock mounting plate
moving lock plate
rolling door lock plate
sliding door lock plate
# BDPL2SS - Large Stainless Steel finish
# BDPL1 - Regular - Black finish
# BDPL2 - Large - Black finish
Additional Hardware Options
Rail Connector
Optional Wall-Mounted Floor Guide
Bypass Bracket or Bypass Bracket Kit
1/8”
1-1/4”
3-1/8”
4-7/8”
3-5/8”
3-1/4”
1-1/8”
2 ”
2-5/8”
5-1/8”
Soft-Close Attachment
1-7/16”
1-7/16”
1 ”
12-9/16”
14
Powered by FlippingBook