Basic Information and Terms for Sliding Doors
IMPORTANT: All BarnCraft sliding door installations must be installed correctly, with the hardware securely mounted onto the wall. Failure to do so could result in damage, injury, or death. Installation should be done by an experienced installer. The rollers must be installed with the distance from the bottom of the roller wheels to the top of the door at 1-7/8". And the Anti-Jump disks and floor guide must be installed in order to ensure a safe installation. A typical BarnCraft door installation consists of two parts; the door, and the hardware kit. These two items are to be ordered independently. Here is information on these BarnCraft products:
Video guides for BarnCraft Sliding Doors: • Several video guides are available to assist with BarnCraft Door products, including:
• Installation of a single sliding door • Installation of a double sliding door • Installation of a bypass quadruple door
Doors for Sliding Door Installations: • Any door may be used with a sliding door installation provided that it is of an appropriate size to cover the opening • Eight styles of doors are shown in the BarnCraft Catalog: 1) Knotty Pine Barn Doors 2) Knotty Alder Barn Doors, 3) Iron Plank Doors, 4) MDF Doors, 5) Rustic Farmhouse Doors, 6) Contemporary Metal Doors, 7) Contemporary Doors, 8) Mahogany & Glass Doors. • Any of GlassCraft's doors may be used with our Sliding Door hardware, provided that the door slab weight does not exceed 220 pounds.
• Refer to the next page for guidelines on selecting an appropriate door slab size for the opening • When ordering for a double door installation, you must order 2 doors and 2 hardware kits
Hardware Kits for Sliding Door Installations: • Hardware Kits consist of all necessary hardware to install a single sliding door • All Sliding Door Hardware Kits include a steel rail. You may choose from 2 rail lengths as is appropriate for your installation. - 78-3/4" length (use for door widths up to 36" wide) - 100" length (use for 38" - 48" wide doors) - for wider custom doors, you may need to supply your own door rail, as we cannot ship parts longer than 100 inches • Door roller straps are all made from 5mm (1/4" nominal) thick steel • Door rollers are all made with "quiet glide" nylon
Each HARDWARE KIT* includes the following:
Hardware Kits - Adjustable Leveling Rails
A Stand-off Bracket (x5) B Rail (x1) – (see page 10) C Floor Door Guide (x1 pair) D Bolt (x5) E Bolt Wall Anchor (x5) F Log Bolt (x5) G Log Bolt Wall Anchor (x5)
G Log Bolt Wall Anchor (x5) H Roller (x2) – (see page 8) I Stopper (x2) J Anti Jump (x2) K Allen Wrench (x1) L 45 mm Roller Bolt (x6) (For use on doors thinner than 1-3/4”)
BDPART1
Includes all screws, 2 Anti Jumps (J), 1 Floor Guide pair (C), for black rollers Includes all screws, 2 Anti Jumps (J), 1 Floor Guide pair (C), for stainless steel rollers Includes 2 stoppers (I), and Allen Wrench (K), for black rollers Includes 2 stoppers (I), and Allen Wrench (K), for stainless steel rollers
BDPART1SS
BDPART2
BDPART2SS
BDPARTS3 Includes (6) 45 mm Roller Bolts with washers (L), for black rollers (For use on doors thinner than 1-3/4”) BDPARTS3SS Includes (6) 45 mm Roller Bolts with
washers (L), for stainless steel rollers (For use on doors thinner than 1-3/4”)
2
Powered by FlippingBook