Product Specifications: BarnCraft ® MDF Doors
Doors built for the BarnCraft MDF Door Series are included in our BarnCraft Sliding Doors & Hardware product catalog, and have the following specifications*:
Door Construction: All MDF doors have a stile width of 5".
All MDF ddors that are primed or painted are 1 3 / 8 " thick. All MDF doors with 3D Laminate are 1" thick.
Door Material: Design Options: Finish Options:
Heavy duty medium density fiber board.
See 14 designs pictured below. Design is routed on both sides of the door.
White primed. Primer is not a smooth final finish. Sanding is required before applying paint. Painted finish. Choose from any of 9 Palette Collection colors (See FiberCraft catalog pages 6-7). Textured 3D Laminates. 19 options include wood grain, rock, gemstone, and brushed aluminum simulated textures and appearances.
V-Grooved MDF Designs
Chevron
2 Panel Chevron
Lynnwood
Flush
Brentwood
1 Panel Plank
Full Plank
Carved MDF Designs
Craftsman 1 Panel
Craftsman
2 Panel
Shaker 3 Panel
Shaker 5 Panel
Triple X
X Blackboard
Available Stock Product Sizes:
Design Options
Width Options
Height Options
A
All MDF Designs
32", 36", 42", 48" wide
80", 84" ,96" height
Notes: 1) Textured 3D Laminate doors include black "T" moulding applied to the 2 vertical edges of the door, while white primed or painted doors do not. 2) Doors are heavy. Installation should be done by at least two people. 3) For Blackboard doors, only real chalk should be used. 4) We do not recommend the Gage hardware for MDF doors. All other BarnCraft hardware models bolt through the door, providing more support for these heavy doors. If you do use the Gage hardware, be sure to drill the pilot hole to the correct depth, which is approximately 1/4" shorter than the length of the screw.
8
Powered by FlippingBook