Premium Fiberglass PRODUCT SPECIFICATIONS
FiberCraft Narrow Profile Doors with Direct Set Glass These doors are shown on catalog pages 40 to 43
• FiberCraft premium series doors have hardwood edges and composite top and bottom rails
• 3 door sizes available: 3’0” x 6’8”, 3’0” x 8’0”, 3’6” x 8’0”
• Three configurations available shown at right - each door configuration available in right or left hand • 3” wide stiles and top rail - 10-1/2” inch bottom rail. On the back or interior side of the door the stiles and rails are 3 inches INCLUDING the glass stop that secures the glass panels.
1 Block Left
2 Block Left
4 Block Left
• Smooth (no texture) fiberglass doors skins
• Solid Timberstrand door core - no foam - provides very strong door
• 3 Insulated Glass Panels available for this door - in Clear, Reeds, or Cloud glass textures. Reeds texture glass panels have the texture running in a top to bottom direction.
1 Block Right
2 Block Right
4 Block Right
• Use standard lock set hardware including multipoint locks. You should make sure that any hardware will fit these narrow stiles prior to selecting your hardware.
• Sizes of the hardware mounting area is as follows: 6’8” 1 Block -- block is 18-5/8” tall 6’8” 2 Block -- block is 35-7/8” tall 8’0" 1 Block -- block is 22-5/8” tall 8’0" 2 Block -- block is 43-7/8” tall
• Doors available pre-hung or as a slab
• Doors are available either Unfinished or with a factory finish in Black - Unfinished doors are white for painting by user
• Pre-hang configurations for single or double doors
FiberCraft Premium Series Narrow Profile Door - Section drawing through hardware block
exterior side of door
5mm double thick Fiberglass door skin
Continuous TimberStrand Stiles and Rails (both edges - top to bottom)
Rock Maple Edge
thick IG
1"
1.75"
5mm double thick Fiberglass door skin
composite glass stop
interior side of door
5
Powered by FlippingBook