Premium Fiberglass PRODUCT SPECIFICATIONS
FiberCraft Premium Series Modern Doors with Aluminum Glass Insert Frames These doors are shown on catalog pages 46 and 47
25mm Panel
25mm IG Unit
Interior Fiberglass or Steel Door Skin
Exterior Fiberglass or Steel Door Skin
Interior Fiberglass or Steel Door Skin Co-Extruded Rubber Internal Gasket Seal Co-Extruded Rubber Internal Gasket Seal Aluminum Internal Cover Cap Welded PVCu Frame with Thermal Break Zinc-plated Pozi-Drive Head Fastener
Co-Extruded Rubber Internal Gasket Seal Aluminum Internal Cover Cap Welded PVCu Frame with Thermal Break Zinc-plated Pozi-Drive Head Fastener Co-Extruded Rubber Internal Gasket Seal
Gasket
ALUMINUM FRAME WIDTH IS 1.5" WIDE ON BOTH SIDES OF DOOR
Gasket
Aluminum External Frame
Aluminum External Frame
Gasket
Gasket
Exterior Fiberglass or Steel Door Skin
Exterior Fiberglass Door Skin
Interior Fiberglass Door Skin
BioFoam
BioFoam
Continuous TimberStrand Stiles and Rails (both edges - top to bottom)
Composite bottom Rail
Rock Maple Edge
bottom edge of door
side edge of door
Aluminum Frames for glass panels and door panels. GlassCraft's Aluminum Frame system is a three-part flush aluminium de-glazeable cassette or insert frame system. It is made up of a smooth aluminium flush face to the exterior, a welded PVC interior holding the IGU, and an aluminium internal cover cap. It’s thermally broken and fully weather tested. The internal cover is 4 separate aluminum parts that snap over the internal PVC frame. All FiberCraft doors shown on catalog pages 46 and 47 doors use this system. We use it for solid door panels AND for all glass panels shown on these 2 catalog pages. The 1 piece exterior side of the Aluminum frame is all aluminum with welded corners. This exterior aluminum frame part is attached to a PVC spacer core with Zinc-plated Pozi-drive fasteners. The Interior side has 4-piece snap-on Aluminum cover caps, providing a system that allows for broken glass to be replaced if needed. The frame is almost flush with the face of the door with only a 3mm high profile. The flat frame face is 1-1/2 inches wide. • For our MODERN/CONTEMPORARY door series these Aluminum Insert Frames are always brushed aluminum in color and appearance. • No fasteners are visible on either side of the door. 45mm Door Slab
6
Powered by FlippingBook