WoodCraft STANDARD ORDER FORM
If adding Door Bore, please answer the following questions below: GlassCraft Multipoint Lock Prep: r Yes
r No Handleset Part # ________________________ *Dummy Handleset Part # _________________
r Yes r Yes
r No If yes, select bore distance (for standard lock sets only): r No If yes, bore diameter is 2 ⅛ ” for standard lock sets.
r 2-3/8”
r 2-3/4”
Latch Set Bore:
Dead bolt bore:
r 5-1/2”
r Other _________________________
Center to center distance:
*Dummy handleset is mounted on the inactive door of a double door unit.
PRE-HUNG HANDING CONFIGURATIONS Inswing Configuration: Handings are to be acknowledged from the exterior looking in. GCDC designations could be different from what you are accustomed to. Please double check according to the images below.
■
■
■
Left Hand Inswing
Right Hand Inswing
Left Hand Inswing
Right Hand Inswing
Right Sidelite Left Hand Inswing
■
■
■
■
■
Left Sidelite Right Hand Inswing
Double Sidelite Right Hand Inswing
Right Sidelite Right Hand Inswing
Left Sidelite Left Hand Inswing
Double Sidelite Left Hand Inswing
Outswing Configuations: Handings are to be acknowledged from the exterior looking in. GCDC designations could be different from what you are accustomed to. Please double check according to the images below.
■
■
■
Left Hand Outswing
Right Sidelite Left Hand Outswing
Right Hand Outswing
Left Hand Outswing
Right Hand Outswing
■
■
■
■
■
Left Sidelite Right Hand Outswing
Right Sidelite Right Hand Outswing
Left Sidelite Left Hand Outswing
Double Sidelite Right Hand Outswing
Double Sidelite Left Hand Outswing
Page 2 of 3
Powered by FlippingBook