INSTALLATION STEPS:
STEP FOUR : Attach Door Floor Guide
Distance From Wall 2
Wall
TOP VIEW
3-7/8”
A
Wall Opening
SIDE VIEW
Top Track B
A
B
Door Slab
Floor Guide Center
Top of Wall
Top of Door Slab
1 9” 16
FLUSH
Door Floor Guide D
Front of Bottom Track ( ( ( =
(
Bottom of Door Slab
_
Distance From Wall
1 9” 16
11” 16
1 9” 16
Door Thickness
+
OPTION 2: Use the formula above only if, (1) The door is plumb with the wall, and (2) The Bottom Track has been installed FLUSH with the Door Slab as shown in the image to the left. (For further information, see page 12, Install the Bottom Track.)
Bottom of Wall
D C I
Floor Guide Center (Pencil Line)
Distance From Wall
B. Attach -
1
3
2
After using a pencil to mark the Door Floor Guide holes, use a drill to make two holes. Next, insert the (2) anchors in to the holes. Use the provided screws to firmly attach the Door Floor Guide. Do Not Over-Tighten. DISCLAIMER: The Houdini Hardware TM Kit has screws and anchors included in the package. Know that the components provided may not be suitable for all other installations. Example: When installing the Wall Mount or Door Floor Guide, additional screws and anchors maybe required. And always ensure all components are properly secured. The weight capacity for the Houdini Hardware TM Kit should not be exceeded (80kg/176 lbs.) Follow all instructions accurately as stated in the installation guide.
19
Visual representations are not to scale.
Powered by FlippingBook