INSTALLATION STEPS:
STEP FIVE : Install The Door Slab A. Install -
Stand up the Door Slab with all the Top & Bottom Track components attached correcly in place. The center of the Door Slab should be relatively centered to the location of the Wall Mount. Two people should lift the Door Slab about 1” in height over the Door Floor Guide and over the Wall Mount guide wheels.
Top Track B
Wall Mount A
1
Wall Mount A
1
2
Top of Door Slab
2
TOP of Wall
Soft-Close Damper
Bottom of Door Slab
Top Track B
BOTTOM of Wall
Slowly lower the door, making sure that the grooved wheel on the Wall Mount fits inside the Top Track Channel and, at the same time, the Bottom Track is lowered over the Door Floor Guide.
C
Bottom Track
Door Floor Guide D
Center
I Bottom Track C
Bottom Track C
1”
Door Floor Guide D
I
D
DISCLAIMER: Ensure the door slab is parallel with the wall. If the wall is not parallel with the slab, then the Wall Mount may need to be shimmed to allow for equal spacing between the back of the door and the surface of the wall in both open and closed positions.
20
Powered by FlippingBook