INSTALLATION STEPS:
STEP ONE : Install Top Track
B. Position - Place the Top Track on the back of the Door Slab - the side that faces the wall. Make sure the Top Track is centered and fl ush with the top of the Door Slab.
Top Track (without End Caps attached) B
FLUSH
Back Side of Door Slab (Facing Towards the Wall)
C. Drill -
Make sure the Top Track is secure and in the correct location before drilling. Afterwards, pre-drill holes for the supplied screws. MAGIC TIP Before drilling, make sure your drill
bit is smaller than the screws you’re using to attach the Wall Mount. It is recommended to use a 1/8” drill bit.
Top Track B
DISCLAIMER: The Houdini Hardware TM Kit should not be altered in any fashion. The Houdini Hardware TM Kit should only be used for the intended purpose. The weight capacity for the Houdini Hardware TM Kit should not exceed (80kg/176 lbs.) . The Houdini Hardware TM Kit should be installed as instructed in this booklet. The screws and anchors included with the Houdini Hardware TM Kit may not be suitable for all installations applications.
6
Visual representations are not to scale.
Powered by FlippingBook