INSTALLATION STEPS:
STEP ONE : Install The Top Track
The following steps show how to install the Soft-Close Damper , the Hard Stop and the Top Track End Cap . These instructions apply for installing on both sides of the Top Track.
1
Top Track B
Slide the Right Hard Stop into position but do not tighten screws.
F
H Soft-Close Damper
F Right Hard Stop
2
Top Track B
Attach the End Cap by ‘snapping’ into place.
Top Track End Cap
J
F
H Soft-Close Damper
3
Top Track B
Once the End Cap is secured, slide the Hard Stop all the way over flush with the End Cap. Tighten Built-In Screws to secure. Slide the Soft- Close all the way over flush with the Hard Stop . Tighten screws to secure.
F
H Soft-Close Damper
Install the Soft-Close Damper on correct side. This will allow the Soft- Close to engage when triggered by the Top Track moving into position.
H
F
J
Correctly Installed
8
Visual representations are not to scale.
Powered by FlippingBook