BYPASS OPTION FOR BARNCRAFT INSTALLATION
Bypass Door Option
The Bypass door installation may be used when there is IN - SUFFICIENT wall space to the right AND/OR the left of the wall opening. A Bypass Installation uses 2 sliding doors and 2 sliding door tracks instead of one. The second door track is cantilevered in front of the first track, so the doors slide in front of and behind each other.
See more about this on page 7. These kits are available in black finish and stainless steel.
For a Double Bypass door installation, you will need 2 doors, 2 sliding door hardware kits plus 1 of these Bypass Rail Bracket Kits (5 brackets per kit). For a Quadruple Bypass door installa- tion (as shown on page 7), you will need 4 doors, 4 sliding door hardware kits, plus 2 of these bypass rail bracket kits.
BYPASS RAIL BRACKET (Stainless Steel option shown)
Left image above: Edge view of double bypass door installation without header. A header may be used which would be installed behind both the inner rail hardware and the outer rail hardware. Black Finish.
Bypass Rail Bracket Kit
BDDPRX Black finish (Set of 5 brackets) BDDPRSSX Stainless Steel finish (Set of 5 brackets)
Note: Vintage Slider Kits are not compatible with the Bypass Bracket Kits.
Right Image above: Stainless Steel option.
BYPASS RAIL BRACKET KIT Shown here in stainless steel finish, installed with 2 BarnCraft Birch sliding doors.
Use your cell phone camera or QRC scan app to SCAN for More Information>
12
Powered by FlippingBook