HOW TO ORDER THE BARNCRAFT DOOR & INSTALLATION VIDEOS
Measuring for your BarnCraft Door
Determine the minimum door width:
T o determine the minimum door width, measure the distance between the inside frame opening and add 2” to each side (A + 2” + 2” = minimum door width ). This will allow the door to cover the frame opening when the door is fully closed.
A
Determine the minimum door height:
T o determine the minimum door height, measure between the finished floor and the frame, then subtract 1/2” for floor clearance from the bottom of the door (B - 1/2” = minimum door height ). Door may cover the existing door top casing trim if desired, or you may want your door taller than the existing opening. Add on to your door height for this.
B
Check for minimum door clearance:
C
A minimum clearance of 6-1/2” (C) is required, measuring from the top of the door to the ceiling, to accommodate the track and sliding hardware. The top of the door should be level with, or above the frame opening.
D
A minimum clearance of available wall space equal to the actual door width plus 2” (D) is required for the door to completely roll free of the door opening.
Video Installation Guides:
Visit the how-to videos on our website: http://www.glasscraft.com/resources/videos/ Video guides are available for installing single, double, and bypass sliding doors.
Use your cell phone camera or QRC scan app to SCAN for How-To Videos >
20
Powered by FlippingBook