DOOR FRAME AND HINGE OPTIONS
Hardwood Door Frames with STRIKEJAMB ™
Mahogany and Knotty Alder pre-hung doors are available with a steel-reinforcement StrikeJamb™ as an option.
Pre-hung units include jamb legs, T-astragal (for double doors), standard sill, header, weatherstripping, and adjustable threshold, plus 3 ball-bearing hinges on 6’-8” tall doors and 4 ball-bearing hinges on 8’-0” tall doors. The StrikeJamb™ reinforcement can be installed on the lock side jamb leg for safety and secu- rity. This plate reinforces the jamb leg, and allows the deadbolt and the handleset bolt to throw so that the bolts extend through the corresponding holes in the steel reinforcement plates. In addition, long mounting screws should be used with this StrikeJamb, these screws ex- tending through the jamb leg, then through the steel plate, and finally into the wall studs.
Image at right shows the reinforcing plate from the back jamb leg side.
Hinge Color Options
All pre-hung units use 3 ball-bearing hinges on 6’8” tall doors and 4 hinges on 8’0” tall doors. 1-3/4” thick doors use 4” hinges. Choose from the three hinge color options shown at left for your pre-hung entry door unit: Bronze, Satin Nickel, or Flat Black.
Choose from these three hinge color options for your pre-hung entry door. Satin Nickel Bronze Flat Black
Construction Door Options
All standard pre-hung entryways in all configurations are available with a temporary “construction door” as an option. Using this temporary door, the permanent door will not be damaged during house construction. Construction doors are available for double-door and arch top and round top double doors also.
Construction Door Part Numbers:
TEMPDOOR1 - Hollow Core 35-3/4” x 79-1/4” x 1-3/4”
TEMPDOOR2 - Hollow Core 35-3/4” x 95-1/4” x 1-3/4”
12
Powered by FlippingBook