BARNCRAFT ® DOOR HANDLES
Black Pull Handles
The black handles shown on this page are made of real hand wrought iron that is durable, heavy, and complements any design theme, together with your choice of BarnCraft door and sliding hardware. As these handles are all hand-made, their size and appearance will vary slightly. All are packaged with mounting screws. The VISTA mounts flush with the face of the door, and requires a mortise pocket be cut or chiseled into the door for installation. The PROSPECT is 1/4” thick, and mounts directly on the door face, and does not require a mortise pocket. The other handles shown below extend above the face of the door, and can only be mounted on the door face away from the wall. The Vista or Prospect may be mounted on the “back” side of the door. The 12” pull handles directly below are designed to be mounted with the Vista or the Prospect on the “back” side of the door, as the screw holes for each align, but they also may be used separately (without Vista or Prospect).
Vista (left, 8” tall) - HP4 Prospect (right, 8” tall) - HP26
Refer to our BarnCraft Product & Information Guide for more detail.
12 ” Pull Handles for 8 ” Vista or Prospect plate mount
The 5 pull handles at right may be used with or without the Vista pull or Prospect plate, with the 12” handle on the front of the door, and the Vista or Prospect on the back side.
Vista - HP4 (8” tall) shown with Metro pull
24 ” Pull Handles
Prospect - HP26 (8” tall) shown with Metro pull
Metro HP20
Brooklyn HP22
Sierra HP23
Concord HP24
Del Mar HP25
12 ” Pull Handles
The 6 pull handles below and the 3 to the left all screw directly into the front face of the door.
San Juan HP16
Gila HP17
Santa Fe HP1
Monterey HP2
Corona HP3
Tucson HP13
Gila HP1724
Tucson HP1324
San Juan HP1624
16
Powered by FlippingBook