Unique HOUDINI Sliding Door Hardware
features CONCEALED SLIDING HARDWARE
Pictured on the front cover of this catalog, our patent pending Houdini Hardware™ Kit features concealed rollers and rail, creating an uber-modern minimalist appearance. This system can be mounted and installed in 1 hour. All of the weight of the door is on the floor instead of hanging on the wall. Top Track and Bottom Track are Anodized black aluminum. Two soft-closing dampers provide smooth operation. The Wall Mount has an adjustment feature to ensure a perfect fit between the Rollers and the Top Rail. This hardware has been cycle-tested to 20,000 cycles. Premium Features:
2 Houdini Hardware Kits: Both Tracks may be trimmed for exact fit. • For doors up to 36” wide #BDHH36 • For doors over 36” up to 48” wide #BDHH48 • Adapter required for Contemporary Metal doors #BDHHA
• Entire system installs onto door & wall in less than 30 minutes for basic installation • Bottom Track can be recessed into bottom edge of door or quickly surface mounted • 2 lengths available: Choice of 36” or 48” • Both Tracks may be trimmed to fit the exact width of your door up to 48” wide. • May be installed as a single door or a double door • Weight capacity of door: 175 lbs. • Houdini Hardware Kit includes all parts listed below and installation guide
Houdini Hardware TM Kit Components
I
A
K
J
D
E
F
30” up to 48”
3”
C
B
oor guide
G
H
What door size is needed for the Houdini Hardware System?
Each HOUDINI HARDWARE KIT* includes: A Wall Mount – zinc alloy (x1)
B Top Track – black anodized aluminum (x1) C Bottom Track – black anodized aluminum (x1) D D oor Fl oor Guide – carbon steel/plastic (x1)
Door size depends upon the size of your opening and the installed location of the Houdini hardware installation. If the door opens completely past the wall opening, or only partially (leaving a few inches of door covering the opening to allow for easier grasp on the door pull on the back side of the door) this will also affect the required door size. Find additional door size information on page 22.
E Hard Stop – carbon steel (Left) F Hard Stop – carbon steel (Right)
G Soft Close Damper – plastic and aluminum (Left) H Soft Close Damper – plastic and aluminum (Right) I Bottom Wheel Assembly – steel/plastic/urethane (x2) J Top Track End Caps (x2: Left & Right) K Bottom Track End Caps (x2: Left & Right) L Set of Fasteners (x1)
8
Powered by FlippingBook