GlassCraft FiberCraft Catalog

PRE-HUNG OPTION & ADVANTAGES

Sill and Sill Color Options

All standard pre-hung exterior door units use adjustable composite sills that help prevent water penetration, rotting, warping, and discoloration. Our standard adjustable composite sill includes a peel-off film which protects the sill during construction, and is made from 100% composite materials. The “adjustable” feature allows the top of the sill to be adjusted with a screwdriver to match the correct height required for the bottom of the door. Optionally, you may select the Endura ® Brand adjustable composite threshold (for an extra charge) that is made from composite and aluminum material or an ADA aluminum threshold. The ADA threshold is approved for use with wheelchairs. ADA sills are 5” x ½” or 7” x ½”. The Endura Z-Series sill system provides a walnut colored sill cap, the adjustable feature, and a hard plastic, protective construction cover.

Bronze Composite finish Mill Composite finish

Bronze Aluminum finish Mill Aluminum finish

OPTIONAL ENDURA ® brand threshold is available in Bronze Aluminum and Mill Aluminum (shown here) finishes, and includes a removable hard protective construction cover.

STANDARD SILL with Composite substrate that will not warp or rot. Available in both Bronze (shown here) and Mill finishes.

OPTIONAL ADA threshold is available in the Mill Aluminum finish only.

Composite Door Frames with STRIKEJAMB ™

All FiberCraft pre-hung doors are available with a steel-reinforcement StrikeJamb™ as an option. Pre-hung units include jamb legs, T-astragal (for double doors), standard sill, header, weatherstripping, and adjustable threshold, plus 3 ball-bearing hinges on 6’8” tall doors and 4 ball-bearing hinges on 8’0” tall doors. The StrikeJamb™ reinforcement can be installed on the lock side jamb leg for safety and security. This plate rein - forces the jamb leg, and allows the dead bolt and the handleset bolt to throw so that the bolts extend through the corresponding holes in the steel reinforcement plates. In addition, long mounting screws should be used with this StrikeJamb, these screws extending through the jamb leg, then through the steel plate, and finally into the wall studs.

Image at right shows the reinforcing plate from the back jamb leg side, which is hidden from view after installation.

Hinge Color Options

All pre-hung 6’-8” tall units use three 4-inch ball-bearing hinges, while 8’-0” tall units use four hinges. Choose from the three hinge color options shown at left for your pre- hung entry door unit: Oil Rubbed Bronze, Satin Nickel or Flat Black.

Choose from these three hinge color options for your pre-hung entry door. Satin Nickel Oil-Rubbed Bronze Flat Black

16

Powered by