INVISIBLE HARDWARE INSTRUCTIONS
4. INSTALLING THE TRACK AT TOP OF DOOR
Track Position: The track should be positioned on the back side of the door flush with the top edge. The track is 1-1/4” thick. If the track is mounted directly to the back side surface of the door (and not recessed into the door - see 2 options below), then when installed, there will be a 1-1/4” space between the back surface of the door and the surface of the wall. This space will allow for most common thicknesses of interior trim and casing. (If your trim / molding / casing is THICKER (protruding) more than 1-1/4” from the surface of the wall, then you will need to mount a spacer between the track and the door face to allow for this thicker molding).
STANDARD TRACK INSTALLATION
HEIGHT OF TRACK 2 3/8”
1 1/4” SPACE
*NOTE: IF PURCHASED YOUR DOOR THROUGH GLASSCRAFT, THE TRACK WILL BE MOUNTED ONTO DOOR FLUSH WITH THE TOP EDGE.
3/8” SPACE BETWEEN DOOR & FLOOR
If desired, the track can be machined into the back surface of the door. Only up to a depth that leaves a minimum door thickness of 13/16”.
MACHINED OPTION 1
MACHINED OPTION 2
HEIGHT OF TRACK 2 3/8”
HEIGHT OF TRACK 2 3/8”
HEIGHT OF TRACK 2 3/8”
HEIGHT OF TRACK 2 3/8”
HEIGHT OF TRACK 2 3/8”
HEIGHT OF TRACK 2 3/8”
1 1/4” SPACE
1 1/4” SPACE
3/8” MACHINED INTO DOOR
3/8” MACHINED INTO DOOR
MAX 1 3/16” MACHINED INTO DOOR
MAX 1 3/16” MACHINED INTO DOOR
3/8” SPACE BETWEEN DOOR & FLOOR
3/8”
3/8”
3/8” SPACE BETWEEN DOOR & FLOOR
3/8”
3/8”
SPACE BETWEEN DOOR & FLOOR
SPACE BETWEEN DOOR & FLOOR
SPACE BETWEEN DOOR & FLOOR
SPACE BETWEEN DOOR & FLOOR
*Note: The track mounts with 3/4” flat head screws. Pre-drilled holes for the mounting screws is required.
Track Width: The correct width of the track should equal the door width minus 1/4”. If the track needs to be cut, measure the width of the door, and subtract 1/4”. This 1/4” allows for the two 1/8” end caps for the track, one at each end. Burrs resulting from cutting the metal track should be removed from the track prior to installation onto the door.
2002 Brittmoore Rd. Houston,TX 77043 | 713-690-8282 | orderentry@glasscraft.net | glasscraft.com
3
Powered by FlippingBook