WoodCraft doors, offered by GlassCraft, are premier, high-quality, custom-made wood doors that set themselves apart from mass-produced alternatives found in standard retail stores. Every WoodCraft door undergoes meticulous craftsmanship to cater to the distinct preferences of discerning customers like yourself.
2002 Brittmoore Road Houston, Texas 77043-2209
Wood Door Finishing, Care and Installation Guidelines Effective August 2022
This guide includes the following information: • Wood door prefinishing services and touch-up kits • Field finishing guidelines • Prefinishing costs • Roof overhang requirements • How to measure a warped door • Installation cross-section drawings and door handing chart
Contact Us
Hours of Operation Monday through Friday Eastern
1-800-766-2196 — National Toll-Free 1-713-690-8282 — Local Sales 1-713-690-2919 Accounting 1-713-690-9994
9:00 am – 6:00 pm 8:00 am – 5:00 pm 7:00 am – 4:00 pm 6:00 am – 3:00 pm
Central
Mountain
Pacific
E-mail: sales:
You are welcome to visit and tour our 185,000 square foot glass and door facility. Please call first, prior to your visit. Weekday hours are listed above. Should you wish to pick up your order, please call to confirm that the order is available for loading prior to your arrival.
sales@glasscraft.com customer service: orderentry@glasscraft.com accounting: accounting@glasscraft.com marketing: marketing@glasscraft.com
Fax:
713-690-2919
www.glasscraft.com
Web site:
Order Forms are on-line at www.glasscraft.com under the RESOURCES tab: www.glasscraft.com/order-forms
AMD ® MEMBER
This catalog is © 2022 GlassCraft ® Door Company, Houston, Texas. No reproduction of any design, drawing, or any other graphic image from GlassCraft Door Company is allowed without specific approval in writing from GlassCraft Door Company. Pricing and product information/specifications may change without notice.
Wood Door Finishing, Care & Installation Guidelines
This section includes the following information: • Door prefinishing services • Receipt and field-finishing of doors • Installation guidelines and required roof overhang • Maintenance and troubleshooting
Wood Door Prefinishing Services You may order any millwork item factory prefinished, including our complete pre-hung entryways. Prices are listed in our various price lists for each catalog, and include pricing for unfinished and prefinished products. Pricing for individual doors, sidelites or transoms are listed on the next page. Ordering your door and millwork prefinished may add to the delivery time required. Urethane Finishing Process — Our environmentally-friendly finishing system utilizes stain-and-seal urethanes. This procedure uses halogen lamp convection ovens, laser temperature controllers and robotic carts on a continuous finishing line. The finished product is applied using a controlled process to ensure a long lasting and consistent product. Our Traditional Finish procedure produces a door with a beautiful, protective urethane finish that promotes long life and beauty, and accentuates the natural beauty and texture of the wood grain. Our experienced finishers apply only the highest quality penetrating stains and clear top coats with UV inhibitors. This ambitious finishing system assures beauty and long-lasting protection. The final top-coat provides a medium gloss finish. Our Antique Finish procedure produces a door with an antique appearance, bringing out the richer, deeper colors in the wood. This finish process is hand-applied, and each door will differ in appearance from the next. Similar to our Traditional finish in stain and urethane top coats, this Antique finish is available in any of our finish colors. The final top-coat provides a medium satin finish. Our Distressed Finish procedure produces a door with the same rich, deep colors of the Antique finish with the addition of a distressed appearance. This finish process is hand-applied, and each door will differ in appearance from the next. Similar to our Traditional Finish in stain and urethane top coats, this Distressed finish is available in any of our finish colors. The final top-coat provides a medium satin finish.
Available Stain Colors — We have nine different finish colors available: Charcoal, Canyon Brown, Cinnamon, Natural, Winter, Slate Grey, Owl Grey, Forest Grey, and Timber Wolf. Refer pages 4-7 in the online catalog at www.glasscraft.com for more information and photos.
Available Finish Samples — We have 4" x 4" finish sample rings which include Traditional, Antique, and Distressed finishes in all nine colors for both Mahogany and Knotty Alder.
Wood Door Field Finishing Guidelines All edge surfaces and front and back surfaces must be finished correctly in order to maintain our warranty on the door. Be sure to confirm that the top, bottom, and side edges of the door are finished correctly after the door is trimmed for installation. Failure to properly field-finish a wood door, including all six sides, or failure to install a wood door in an appropriate exposure will result in a voiding of the warranty. Upon Receipt of Door Inspect your door thoroughly. Immediately check for “squareness” or warp. DO NOT cut, fit, or hang any door with any noticeable damage or defects. If any type of problem is found, notify the company from which you purchased the door for further instructions. If you purchased the door directly from GlassCraft, please call our Customer Service department. Storage and Handling 1) Before installing, allow 24–48 hours for the door to adapt to the general humidity and temperature conditions of your area. 2) Doors should always be stored flat, in a clean, dry, well-ventilated room. Protect from dirt, water and abuse. If stored for long periods, doors should be sealed with a high quality sealer or primer. 3) Doors should be stored in a dry area, and must not be exposed to abnormal heat, direct sunlight, direct moisture or extreme dryness or humidity. 4) Deliver to your building site after the plaster and cement are completely dry. Avoid prolonged exposure to heated or air-conditioned environments prior to finishing. 5) If the doors are to be stored on the job site, all ends and edges must be sealed with a wood sealer in order to prevent moisture absorption. 6) Doors should always be handled with clean hands or while wearing clean gloves, to prevent dirt and oils from penetrating the wood grains. 7) Doors should be lifted and carried, not dragged in order to prevent damage to the wood surface.
Continued on next page
2
Wood Door Finishing, Care & Installation Guidelines
Continued from previous page
Preparation for Field-finishing 1) Prior to finishing, ensure that the building atmosphere is dried to a normal, interior relative humidity. Ensure that the doors have been allowed to equalize to a stable moisture content. 2) Doors must be finished prior to final installation. 3) To assure uniform moisture exposure and dimensional control, ALL surfaces must be treated equally. This includes front and back, top, bottom and 2 sides. 4) Before preparation and finishing, cut, fit and hang the door. Then remove the door and any hardware prior to finishing. When trimming the door, do not remove more than 1˝ from the bottom rail and/or 1 ⁄ 2 ˝ from the top rail of the door. Do not reduce the width of the door by removing more than 1 ⁄ 2 ˝ from either side edge. Removal of more than these amounts from the door will void the warranty. 5) Before applying the first finishing coat, sand entire surface lightly to remove handling marks, raised grain or other undesirable blemishes. Use 120 to 180 grit sandpaper, and always sand in the direction of the grain. Spot sanding can cause the finish to appear splotchy. 6) After sanding, clean the entire door with a clean cloth to remove all dust or foreign debris. (Avoid caustic or abrasive cleaners). 7) Certain species of wood contain chemicals which react unfavorably with certain finishes, causing dark stain spots. Where possible, the finish selection should be tested prior to complete application. 8) Avoid very dark stains or dark colored paints on door surfaces exposed directly to sunlight. Dark colors induce warpage. 9) Properly finish the entire door. Coat all 6 edges (including top, bottom, sides, and face surfaces) with each application. Adequate drying time between coats must be allowed, as the door must be dry before the next finishing step. Exterior Finishing Caution: GlassCraft Door Company does not evaluate all of the available paints, stains or application requirements. Contact your paint dealer for systems best suited for your geographic region. Select only top quality finishes, and follow all of the finish manufacturer's complete instructions. Stain-and-Clear Finish 1) To color stain and seal, make first coat a stain or stain-and-sealer coat. All stain and clear finishes will perform better if protected from the direct effects of sunlight and moisture weathering, thereby requiring refinishing less frequently. 2) Make second coat a top quality sanding sealer or top coat material. Urethane-based finish systems with UV inhibitors are an excellent choice for a door finish. Be sure the door surface to be finished is satisfactory in both smoothness and color after each coat before applying the next coat. Individual Product Finishing Costs The cost for the finishing of a door, sidelite, transom, or jamb unit varies depending upon the products size, type of finish and production time. Suggested Retail Pricing is as follows: Item Traditional Finish Antique Finish Distressed Finish Doors up to 3´ 0˝ X 6´ 8˝ in size $ 550 each $82 0 each $1,060 each Doors over 3´ 0˝ X 6´ 8˝ (including 8´ 0˝ high doors) $665 each $ 975 each $ 1,295 each All sidelites or transom frames or s ash $2 95 each $ 390 each $585 each Refer to the Mahogany & Knotty Alder Entry Door Catalog online for detailed Prefinish Pricing info for all available door and entryway configurations.
3) Lightly sand with 220 to 360 grit sandpaper between each top coat. Remove dust before re-coating. 4) Minimum of 3 top coats (in addition to the base stain coat) on all 6 edges is required for proper protection.
Recommended staining and finishing steps:
• Remove handling marks and final sanding • Raw wood treated with penetrating wiping stain • Repeat penetrating wiping stain if required for desired color • Light sanding if desired • First coat of sanding sealer or top coat • Fine sand by hand • Second coat of top coat • Fine sand by hand • Third coat of top coat
Paint Finish: 1) To paint finish your door, use a solvent based primer coat and a compatible solvent based finish coat. 2) Sand all surfaces between all coats of primer and finish. 3) A minimum of three top coats on all 6 edges is recommended for proper protection.
Continued on next page
3
Wood Door Finishing, Care & Installation Guidelines
Continued from previous page
Installation Suggestions and Required Roof Overhang 1) The utility or structural strength of the door must not be impaired in fitting to the opening, in applying hardware or other detailing. 2) Use a minimum of one hinge for each 30˝ of door height on all exterior doors. When using three or more hinges, they are to be equally spaced. Standard height (6´8˝) doors require three (3) hinges. Extra height (8´0˝) doors require four (4) hinges. Quality ball-bearing hinges are recommended for superior service in these hardwood door applications. 3) Clearances between door edges and door frame should be a minimum of 1 ⁄ 16 ˝ on the hinge edge, and 1 ⁄ 8 ˝ on the latch edge and top rail. 4) All hardware locations, preparations for hardware and methods of hardware attachment must be appropriate for the specific door construction. 5) Apply the sealer, primer or first coats of the required finish immediately after fitting, cutting for hardware, weatherstripping, etc. Be sure to finish all surfaces of the door, including those surfaces milled for the hardware prior to installation of the hardware. Also be sure to finish the top and bottom edges of the door, as well as the sides of the door, prior to installation. 6) Damage caused by failure to comply with this Wood Exterior Entry and Finishing Information section, failure to perform normal homeowner maintenance, or by attempts other than by GlassCraft to repair the door will void the GlassCraft warranty. 7) The door or entryway system must be installed in a protected opening with adequate roof overhang to protect the door and entryway. Damage may result from exposure due to installation in an unprotected opening, such as an installation without sufficient roof overhang protection. This will cause the door and/or entry system to be exposed to an unusual amount of direct sunlight and/or precipitation, which will result in the failure of the door or entryway. This damage is specifically not covered by GlassCraft‘s warranty.
Required Roof Overhang
Please refer to this information to ensure that your installation will provide the correct amount of protection for your wood door.
Roof Overhang Overhang distance elevation distance
An adequate roof overhang (see drawing at right) is one in which the roof overhang projects out a distance from the structure no less than one-half of the elevation difference between the lowest edge of the door and the base of the overhang’s highest point above the entryway. This calculation is shown at right.
= 0.5 or greater
Roof Overhang Distance in Inches
Overhang’s Highest Point
Maintenance and Troubleshooting If you maintain your door properly, it will give you years of enjoyment. The most important single method to ensure the door’s longevity is to apply a high quality stain and finish. We recommend that only top quality finishes specifically produced for exterior applications be selected.
Lowest Edge of Door
Quality of the Finish : Stain-and-clear finishes perform better if protected from direct sunlight, moisture and other weathering conditions. Refinishing will be required less frequently if a proper finish is initially added to the door. Some finishes on exterior doors deteriorate relatively quickly with exposure to the environment. In order for your exterior door to continue receiving the protection required, inspect the condition of the exterior finish at least twice a year and refinish as often as needed to maintain the protective integrity of the finish. If required refinishing is not completed as needed, you will allow moisture to enter the wood in the door. This will cause the door to warp or crack, and will void any warranty claims. Inspect the finish on all six sides of the door.
Roof Overhang
Binding or Sticking of the Door: Ensure that the door(s) continues to swing freely, does not bind in the frame, and that all hardware remains completely functional. If the door begins to stick or bind in the door frame, sand the edge of the door (use an electric sander or a hand plane) to trim the door so that it does not bind or stick. Be sure to refinished the newly sanded exposed area. Usually, it takes as long as one year for a wood door to acclimate to it’s installation surroundings. Cleaning the Door: Cleaning of the door is best performed by simply dusting the interior and exterior of the door using a soft, clean cloth. If required, a very mild soap and water solution may be needed to remove dirt from the door. Do not use any abrasive detergent or solvent based product, as these products will harm the quality of the finish. White or Unfinished Lines around the edges of the panel are caused by the normal contraction and expansion of the “free floating” panels in the doors, due to varying climatic conditions such as dry or hot weather. If the panels were nailed in place, they would crack during these conditions. Use a standard wood stain to touch-up and eliminate this line.
Continued on next page
4
Wood Door Finishing, Care & Installation Guidelines
Continued from previous page
How to Measure a Warped Door Panel The terms Bow, Cup and Twist are all terms used to describe a warped door panel. A Bow is a curvature along the door height. A Cup is a curvature across the door width and a Twist is when one corner is distorted out of the plane of the other three corners. To inspect a door for warp, with an 8’-0’’ level or straight-edge measure the concave face of door – diagonally, horizontally or vertically. Measure at the point of maximum distance between the level or straight-edge and the face of the door. The door must be open when taking measurements and should not be measured in relationship to the door frame. GlassCraft Warranty allows for a warp of up to 1 ⁄ 4 ” in any plane of the door for any 6’8” tall door up to 36” wide, and a warp of up to 1 ⁄ 2 ” in any plane of the door for doors taller than 6’8” and up to 8’0” tall and up to 42” wide. Doors wider and/or taller are not covered by a warranty against warping. There are many reasons a door can become warped, such as relative humidity, temperature range, improper handling, stacking and storage. For more information on preventing warping please refer to our finishing, installation, maintenance and warranty information provided by GlassCraft. Door should be open when measuring for warping. A door may not fit into the frame properly but is not warped. In these cases, check the frame installation as the frame may not be set plumb, level and square and the jamb should be in alignment. Action on any claim for warp may be deferred for up to the full period of the warranty to permit doors to acclimate to temperature and humidity conditions.
String or Straight Edge Place a 8' level on Concave side of the door. Then take measurement at the center of the door and level.
Level
Door Level
Door Incorrect way to measure a door
Measure Gap
Incorrect way to measure a door.
Correct way to measure a door for bowing problem. Correct way to measure a door
Measure Gap
Place an 8' level or straight edge on the concave side of the door and take measurement at the widest point between the door and the level.
Concave Face of Door
5
Wood Door Finishing, Care & Installation Guidelines
TRADITIONAL FINISHING KIT
DISTRESSED FINISHING KIT
Stain
Stain
Top Coat
Top Coat Packed and shipped with 1 qt. size jug of Stain and Top Coat, and ScotchBrite ® sanding pad. (*Natural Kit does not include a Stain.)
Glaze
Packed and shipped with 1 qt. size jug of Stain,Top Coat, Glaze, and ScotchBrite ® sanding pad. (*Natural Kit does not include a Stain.)
Cinnamon Traditional
# GCRKCRT # GCRKCBT
$ 75 $ 75
Cinnamon Distressed
# GCRKCRD $120 # GCRKCBD $120 # GCRKWWD $120 # GCRKFGD $120 # GCRKOGD $120 # GCRKSGD $120 # GCRKTWD $120 # GCRKSBD $120
Canyon Brown Traditional
Canyon Brown Distressed
Winter Traditional
# GCRKWWT $ 75
Winter Distressed
Forest Grey Traditional Owl Grey Traditional Slate Grey Traditional Timber Wolf Traditional Charcoal Traditional Natural* Traditional
# GCRKFGT # GCRKOGT # GCRKSGT # GCRKTWT
$ 75 $ 75 $120 $ 75
Forest Grey Distressed Owl Grey Distressed Slate Grey Distressed Timber Wolf Distressed Sierra Brown Distressed
# GCRKCHART $ 85
# GCRKBT
$ 68
Natural* Distressed
# GCRKBD
$ 95
Please note: Natural* Traditional and Distressed finish kits will not include a Stain; Do not use kits that are more than 1 year old.
For questions: Email orderentry@glasscraft.com or call 713-690-8282. Visit our website www.glasscraft.com for more information.
Maintain your Investment and Protect your Door Wood door finishing kits can be used to stain and finish a raw wood door or to refinish a previously finished door. The kits are shipped with a scotch brite sanding pad and qt. size jugs containing enough stain and top coat to finish one complete 3’0” x 8’0” door on all 6 sides. .
Be sure the door surface to be finished is satisfactory in both smoothness and color after each coat before applying the next coat. Lightly sand with 220 to 400 grit sandpaper between each top coat. Remove dust before recoating.
Apply a minimum of 3 top coats (in addition to the base stain coat) on all 6 edges as required for proper protection.
Please read and follow all manufacturer's instructions and product labels before using any GlassCraft Door Company Finishing Kit. You may visit www.glasscraft.com or refer to the complete instruction guide that goes with your order of GlassCraft's wood finishing kits.
Please bear in mind that all stain and clear finishes will perform better if protected from the direct effects of sunlight, moisture and weathering, thereby requiring less frequent refinishing.
Order the finishing kits by Sending an email to orderentry@glasscraft.com, or calling 713-690-8282.
6
Wood Door Finishing, Care & Installation Guidelines
Jamb Section—Door and Sash-Set Transom Brick Veneer, Drywall, & Brick Mould View from Side
Jamb Section—Door and Direct-Set Transom Brick Veneer, Drywall, & Brick Mould View from Side
Brick Veneer
Brick Veneer
Rough Framing (H eaders)
Lintel
Lintel
Interior Casing
Brick Mould
Brick Mould
Quarter Round Stop
Glass Panel
Glass Panel
Door Header Jamb Outside Mullion Top Transom Jamb Bottom Transom Jamb
INSIDE
Transom Sash
Door Header Jamb Outside Mullion Sloped Sill
Inside Mullion Door
Sloped Sill
Threshold
Threshold
Jamb Section—Single Door Entry Brick Veneer, Drywall, & Brick Mould View from Top
INSIDE
1 ⁄ 2 ˝ Space Typ.
1 ⁄ 2 ˝ Space Typ.
Hinge Door
Interior Casing
Drywall
Rough Framing
Weather Stripping
Jamb
Brick Mould
Exterior Siding
Brick Veneer
Rough Opening Width
OUTSIDE
7
Wood Door Finishing, Care and Installation Guidelines
Jamb Section — Single Door with Sidelite Entry Brick Veneer, Drywall, & Brick Mould View from Top
INSIDE
1 ⁄ 2 ˝ Space Typ.
1 ⁄ 2 ˝ Space Typ.
Rough Framing
Interior Casing
Quarter Round Stop
Hinge
Drywall
Door
Weather Stripping
Exterior Siding
Sidelite
Brick Veneer
Jamb
Jamb
“Fat Boy” Jamb
Brick Mould
OUTSIDE Rough Opening Width
Standard Door Handing Chart
Inside
Inside
Outside
Outside
Left Hand Inswing (LH) Single Door Inside
Right Hand Inswing (RH) Single Door Inside
Outside
Outside
Left Hand Reverse (LHR) Single Door
Right Hand Reverse Single Door (RHR)
Inside
Inside
Inactive (LH)
Inactive (RH)
Outside Paired LH Active
Outside Paired RH Active
Inside
Inside
Inactive (LHR)
Inactive (RHR)
Outside Paired Door—LHR Active
Outside Paired Door—RHR Active
Indicates Entry or Keyed Side of Door (Active Door of Pair)
8
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Powered by FlippingBook