INSTALLATION STEPS:
STEP THREE : Attach Wall Mount
B. Attach - Once you have determined the Wall Mount’s vertical and horizontal position (How High / Left or Right), now it’s time to accurately position & attach the Wall Mount. The Wall Mount has (6) pre-drilled holes where screws will be used to attach to the wall. Once the Wall Mount is in position on the wall, use a pencil to mark all (6) holes, then remove the Wall Mount.
Wall Mount A
MAGIC TIP Rather than making marks directly to the wall, tape can be applied over the area (as seen in the image) and removed after use. Next, pre-drill all (6) pencil marks. Use supplied screws & anchors to attach Wall Mount. Do Not Over-Tighten.
1”
FULLY OPEN
Wall Mount A
Height of Wall Mount
PENCIL LINE
Edge of Door
17
Visual representations are not to scale.
Powered by FlippingBook