BARNCRAFT ® DOOR HANDLES
Stainless Steel Pull Handles
The stainless steel handles shown on this page and throughout this catalog are made of real stainless steel. As these handles are all hand-made, their size and appearance will vary slightly. All are packaged with mounting screws. The VISTA pull (shown at near left) and the PROSPECT pull (far left) mount on the face of the door. The Vista requires a mortise pocket be machined or chiseled into the door. The PROSPECT is 1/4” thick, and mounts directly on the door face, and does not require a mortise pocket. The Metro handles extend above the face of the door, and can only be mounted on the door face away from the wall. The Vista or Prospect may be mounted on the “back” side of the door. The Metro is mounted with screws from the back side of the door, which will be visible on the back side. The 12” and 16” Metro pull handles are designed to be mounted with the VISTA or the PROSPECT on the “back” side, as the screw holes for each align, but they also may be used separately (without the Vista or Prospect).
Vista (Right) (8” tall) - HP4S Prospect (Left) 8” tall) - HP26S
Refer to our BarnCraft Product & Information Guide for additional specifications and information.
Metro - HP48S (48” tall) Stainless Steel
Metro - HP20S (12” tall) Stainless Steel Diameter: 3/4″ Total Length: 12″ Projection: 3″
Metro - HP60S (60” tall) Stainless Steel
Diameter: 1-1/4″ Total Length: 48″ Center to Center Door Mounting Distance: 30″ Projection: 3″
Diameter: 1-1/4″ Total Length: 60″ Center to Center Door Mounting Distance: 48″ Projection: 3″
will fit VISTA pull.
Metro Stainless Steel: Available in 12”, 16”, 48”, or 60” tall.
The 12” and 16” will fit the Vista pull to mount together, or they may be used separately.
Metro - HP21S (16” tall) Stainless Steel Diameter: 3/4″ Total Length: 16″ Projection: 3″
will fit VISTA pull.
www.glasscraft.com | BarnCraft by GlassCraft |
17
Powered by FlippingBook