INSTALLIATION GUIDE DesignCra Steel Interior Door
INSTALLING THE DOOR HANDLES 8
Exterior Handle
Interior Handle
Allen Wrench
HANDLE IDENTIFICATION Lay out all components and identify the interior and exterior handles.
Set Screws
Stando Screws
Spindle
No exposed fastener holes.
Visible interior fastener holes.
1. Remove Standoff Screws
2. Thread Standoffs
3a. Align Spindle
3b. Insert Spindle Halfway
Remove the screws from the handle standoffs.
Thread the standoffs into the appropriate handle and tighten them securely.
Align the spindle dimple with the corresponding opening, as shown.
Insert the assembled spindle into the exterior handle. Do not insert the spindle completely into the handle. Position it approximately halfway in, as shown.
4. Final Handle Assembly
5a. Position Exterior Handle
5b. Position Interior Handle
6. Check Handle Alignment
Final assembly should appear as shown.
From the exterior, the handle should have a clean face with no exposed mounting screws.
From the interior, the mounting holes will remain visible for fastening.
Position both handles on opposite sides of the door and confirm alignment.
Note: If you need additional guidance, please refer to the installation video.
7
Powered by FlippingBook