INSTALLIATION GUIDE DesignCra Steel Interior Door
6
REINSTALLING THE DOOR
1. GlassCra recommends two people when reinstalling the door. 2. With one person supporting each side, carefully li the door above the hinge pins. 3. Align the hinges and slowly lower the door into position. 4. Once the door is fully seated on the hinges, carefully swing it open and closed to confirm smooth operation. 5. Install the provided cover plugs into the remaining frame screw access holes, as shown, for a clean, finished appearance.
1. Lift the door above the hinge pins.
3. Lower the door onto the hinges.
4. Close door to confirm the operation.
5. Install the cover plugs in.
7
INSPECT THE INSTALLATION
1. Before moving forward, inspect the door and frame carefully. 2. Check for uneven gaps, misalignment, rubbing, or anything that could prevent the door from opening and closing properly. 3. Make any necessary adjustments before continuing.
Inspect for gaps, misalignment, or rubbing.
Make any necessary adjustments before continuing.
Note: If you need additional guidance, please refer to the installation video.
6
Powered by FlippingBook