INSTALLIATION GUIDE DesignCra Steel Interior Door
INSTALLING THE STEEL FRAME 5
1. Position the steel frame inside the opening and center it within the existing jamb. 2. Using the frame openings as guides, drill pilot holes into the jamb, starting on the hinge side and working around the frame. 3. Secure the frame from top to bottom with the provided screws, checking alignment as you work.
4. Leave the fasteners slightly loose at first to allow for minor adjustments. 5. Use a level to confirm the frame is plumb vertically and level across the top. 6. Make sure the frame stays centered and is not twisted, bowed, or pulled out of alignment. 7. Once properly positioned, fully tighten all fasteners. 8. Perform a final check for plumb, level, and proper alignment. 9. Insert shims as needed between the steel frame and existing jamb for proper support.
1. Center the steel frame in the jamb.
2. Drill pilot holes, start on hinge side.
7. Fully tighten all fasteners.
9. Add shims as needed for support.
Steel Frame Fastening
Provided Screws
Pre-drilled holes in door frame
Door Frame
A. Insert door frame into the jamb and pre-drill holes.
B. Attach door frame to hinge- side of the Door Jamb.
Note: If you need additional guidance, please refer to the installation video.
5
Powered by FlippingBook